Creality Original Ultra Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 Pro/Ender 3 V2/3 V2 Neo/Ender 3 S1/3 S1 Pro/Ender 5 Pro 235X235mm

Adventure 5m user here and the PEI metal plate it came with was really nice and worked for 100 plus hours of printing but then all of sudden the glue literally was not sticking to the metal plate anymore, I would apply glue (4 different brands) and once I over applied the glue it would not be sticky but slick instead. Hopped on amazon to see if there was a product to help me and this one is awesome! No need for the magnet sheet bc the bed is metal so just the top part is what I needed. NOTE: the sheet it comes with is thicker than my plate so you NEED to offset the Z axis, on my 5m its exactly -1.0mm and the prints always come out amazing and so easy to remove from the flexible sheet. No need for glue anymore baby!

I bought a glass build surface awhile back, and effed it up because my nozzle was set too low. If the spongy surface on the glass bed is scratched, it ruins it. So I got one of these magnetic ones, and it's a big improvement over both the glass and stock build plates.One thing I noticed is that it's very difficult to remove prints if you set the print bed temp. at 60 degrees, but prints come right off if you set it at 50 degrees C or below very easily. Another thing to note is that both of the pieces—the magnet and print bed—are both made up of smaller, rectangular magnets; neither is made of just metal. Because the magnets on both sides are rectangular, you can run into an issue where you stick the magnet down to the print bed, and go to lay the top sheet on it, and it won't line up exactly with your 3D print bed surface. There will be like an extra 1/4" of either underhang or overhang on the left or right.But the top surface itself is larger than the stock build plate, so you can also cut it to size if you prefer. I ran into the issue where if I let the top surface overhang on the right, it bumps against the power supply enclosure. So, I leave it with like 1/4" overhang on the left side of the plate, no big deal.It's so much better than holding down your print surface with binder clips. And the magnet is extremely flexible. Prints tend to peel right off, so long as you keep the bed temp. at 50 degrees C. I will say that they're near impossible to peel off if the bed is set at 60 degrees, and I can't emphasize this difference enough.

Title: Reliable Upgrade for 3D Printing: Creality Original Ultra Removable Magnetic Build SurfaceRating: ⭐⭐⭐⭐⭐ (5/5)Review:As a devoted enthusiast of 3D printing, I'm always on the lookout for enhancements that can elevate my printing experience. The Creality Original Ultra Removable Magnetic Build Surface is undoubtedly one of those game-changers.Firstly, installation is a breeze. The magnetic base securely attaches to my 3D printer's heated bed, providing a stable foundation for my prints. Its compatibility with various Creality models ensures a hassle-free setup process.The build surface itself boasts remarkable adhesion properties. Whether I'm printing with PLA, ABS, PETG, or other filament types, my prints consistently adhere well without the need for additional adhesives. This results in smoother, more reliable prints and significantly reduces the risk of warping or detachment mid-print.One of the standout features of this build surface is its removability. Once a print is finished, simply flexing the magnetic sheet allows for easy removal of the print without the need for scraping or prying, preserving both the integrity of the print and the surface itself. This convenience saves me valuable time and minimizes the risk of damaging my prints or the build surface.Furthermore, the durability of the Creality Original Ultra Removable Magnetic Build Surface is impressive. Despite countless printing hours and numerous print removals, the surface shows no signs of wear or degradation. Its longevity ensures that it remains a reliable component of my 3D printing setup for the long haul.In conclusion, the Creality Original Ultra Removable Magnetic Build Surface is a must-have upgrade for any 3D printing enthusiast. Its ease of installation, exceptional adhesion properties, convenient removability, and outstanding durability make it a standout product in the realm of 3D printing accessories. Highly recommended for beginners and seasoned users alike.

as mentioned in the title, i was not satisfied with the magnetic adhesion of the build plate to the printer. The print bed would move at the slightest touch and would bearly stay put for the initial adhesion of the PLA. ive read up on other reviews about the same problem, something about rotating the magnet 90 degrees. i considered it to be a valid point, so i adjusted the build plate and it didnt change. before nocking both build plates, i also found a few comments regarding the inconsistent magnet strength, so i put together the last one and it had a decent enough strength. although it wasnt as powerful as i would have wished... i plan on returning the other one, but, over all this product gave me mixed results and i would still rate it 3 out of 5.(update) hold on a sec, this plate has a bit of redemption on my hands? by rubbing it on the build plate holder, it stuck better! it also seems to increase in strength when the printer is on rather than off, which could be me over analyzing... but still, the build plate magnet strength has met my needs and it prints decently! i now re-rate this as 4 out of 5. thanks!

Absolutely Excellent on my Ender 3v2 using PETG. Sticks TOO WELL on first use. So i used a tiny bit of Glue stick on it. It then stuck too little. Washed it off- and now, with no other coating- its Perfect!

Worked great for well over 500 hrs of printing. TPU adheres to it like it's welded. Easy to keep clean even if like me, you use glue stick like a crutch on the ender 3.